SDSHobby
MAX FORCE 20C 900MAH 3-CELL/3S 11.1V LI-PO BATTERIES FOR T-REX 250
| Max Charging Current | 5C/4.5A |
| Max Cont. Discharging Current | 20C/18A |
| Max Burst Discharging Current | 40C/36A |
| Net Weight | 66g |
| Size | H21*W30*L56mm |
| Application | for T-REX 250,etc |
| Plug Type | Deans Plug and Balance Chargeable Plug |
Specifications:, Kindly Remark:, Pictures for reference only, because the product constantly upgrade, so the appearance of the few products maybe small change, but the technology parameters is perfectly, quality is guaranteed.,
SDSHobby
MAX FORCE 20C 900MAH 2-CELL/2S 7.4V LI-PO BATTERIES FOR E-SKY LAMA
Specifications:, Max Charging Current:, 5C/4.5A, Max Cont. Discharging Current:, 0C/18A, Max Burst Discharging Current:, 40C/36A, Size:, H14*W30*L56mm, Net Weight:, , Application:, for E-Sky LAMA, etc, Plug Type:, JST Plug and Balance Chargeable Plug, Kindly Remark:, Pictures for reference only, because the product constantly upgrade, so the appearance of the few products maybe small change, but the technology parameters is perfectly, quality is guaranteed.,
44g/1.7ozSDSHobby
MINI SERVO SECTIONBOARD POWER BOX FOR GAS PLANE WITH 20A UBEC
| 1.Working voltage | 7-13V |
| .Steering current, voltage | 0-20A,4.8-9 .7 V (factory voltage is 5.2V) |
| 3.Weight | 80g |
| 4.Volume | 116mm(long)*88mm(wide)*13mm(height) |
| 5.Working temperature | -20°C to 85°C. |
Description:, The product is mainly used for the servo with large regular vane’s airplane, such as gasoline engine. This product can distribute several strings’ power. The sectionboard integrates CDI remote flameout swiches and reserves position for receiver, which make servo’s lines convenient and tidiness. If you use double powers input to the power supply, it will be more stable and more security., Technology Parameters:, Features:, 1. Eight channels for input, and sixteen channels for output.(every one channel input with two channels output ),
. Integrates CDI remote flameout switches. Through each channel of ...SDSHobby
MAX FORCE 2-CELL/ 2S 7.4V 5200MAH 35C LIPO BATTERY FOR CARS
| Max. Charging Current | 5C/26A |
| Max. Cont. Discharging Current | 35C/182A |
| Max. Burst Discharging Current | 70C/364A |
| Size | H23*W45*L139mm |
| Net Weight | 288g |
| Application | for RC cars |
| Plug Types | T Plug |
Specifications:, Kindly Remark:, Pictures for reference only, because the product constantly upgrade, so the appearance of the few products maybe small change, but the technology parameters is perfectly, quality is guaranteed.,
ï1⁄4‹ Balance Chargeable PlugSDSHobby
MAX FORCE 25Cˆ•4400MAHˆ•6S1P/ 22.2V LIPO BATTERY FOR 600 HELICOPTER
| Max Charging Current | 5C/22A |
| Max Cont. Discharging Current | 25C/110A |
| Max Burst Discharging Current | 45C/198A |
| Size | H59*W43*L135mm |
| Net Weight | 635g |
| Plug Types | T Plug |
| Application | for 600 helicopter |
Specifications:, Kindly Remark:, Pictures for reference only, because the product constantly upgrade, so the appearance of the few products maybe small change, but the technology parameters is perfectly, quality is guaranteed.,
ï1⁄4‹ Balance Chargeable PlugSDSHobby
NITRO IGNITION/CDI WITH VOLTMETER AND LARGE CURRENT DIGITAL DISPLAY SWITCH
| 1. CDI Working Voltage | 4.2-6V, 4.2-12.6V (if receiver supports high voltage) |
| . Voltage Display Range (Nixie tube) | 3.5-15V |
| 3. Max. Current (switch) | 20A |
| 4. Input Wire | 24# silicone wire, L15cm |
| 5. Output Wire | 60 cores, L25cm |
| 6. Plug Type | FUTABA/ JR compatible |
| 7. CDI Wire | 24# silicone wire, L40cm |
| 8. Weight | 50g |
Product Description:, The built-in nitro ignition is used for RC planes, RC cars and RC boats nitro engine., Specifications:,
CDI battery is no need to add, because the CDI ...SDSHobby
NEW 65IN SBACH 342 20CC RC MODEL PROFILE GASOLINE AIRPLANE ARF ORANGE COLOR
| High performance hardware including | Ball linkage control system; PU Wheels; C.F.Tube; |
| Receiver battery | (suggest item No. |
Specification:, , Wingspan:, 65inch/1659mm, Length:, 59.1inch/1502mm, Flying weight:, 3100g, Wing Area:, 50.5sq.dm, Equipped Fuel Tank:, 60ml/260cc, Center-of-Gravity Location:, 147mm, Features:, Engine:, 60-90, 90-110 Nitro Engine or DLE 20CC, Radio:, 4-6 Channels, at least 6 servos, Propeller:, 11x6, 12x6, 13x4, 13x8, 15x6, 16x5, 16x8, 16x10, 17x6, (depends on engine), Spinner:, .255-3.25inch spinner, Power Switch:, twin power switch (one for the receiver, one for the ignition CDI), NOTE:, Because the product is in updating, accessories configuration occasionally a small changes, accessories pictures for reference only, accessories on receipt shall prevail, thanks.,
Light weight construction Latest structure High structural strength Two pieces ...SDSHobby
NEW 30A BRUSHED ESC FOR SMOKE PUMP SYSTEM
Introduction:, The Latest brushed ESC we sold in our company is a hot selling product, it’s often used when the hobby lover DIY some electric models. This one has been improved, according to the feedback and advice from our customers., Parameter:, Input Voltage:, DC4.8-22V (The original one is 6V-12V), Peak Output Current:, 60A, Rated Output Current:, 30A, Features:,
Using original double MOS tubes , the more low resistance, ...SDSHobby
NEW RAINBOW RC MODEL EPP FOAM ELECTRIC AIRPLANE ARF
| Wingspan | 1201mm |
| Motor | 3542, 2815, 900-950KV Brushless outrunner |
| ESC | 40A |
| Battery | 3S 11.1V 2200-2600MAH Lipo |
| Prop | 13*6 / 13*6.5E |
| Servo | 4pcs, 1.5-2kg/cm, 0.1-0.18sec, 9-12g servo with metal gear |
Specifications:, Requirements for Ready to Fly Set (need to buy separately):, Features:, The product is mainly made of EPP material, light-weight and resistant. Due to this special material, serious damage would not be caused by slight faulty operation.,
Length:1238mm Wing Area:31.6dm Weight:1080g (without battery) The revolutionary design adds ...SDSHobby
N2826 SERIES MOTOR SHAFT D3MM WITH CIRCLIP
| L2 (Overall Length) | 41mm |
| L1 (Short End) | 12mm |
| D(Shaft Diameter) | 3mm |
| L3 x L4 (Groove) | 4.5 x 2.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N2830 SERIES MOTOR SHAFT D3MM WITH CIRCLIP
| L2 (Overall Length) | 45mm |
| L1 (Short End) | 12mm |
| D(Shaft Diameter) | 3mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N2836 SERIES MOTOR SHAFT D4MM WITH CIRCLIP
| L2 (Overall Length) | 51mm |
| L1 (Short End) | 12mm |
| D(Shaft Diameter) | 4mm |
| L3 x L4 (Groove) | 4.5 x 2.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N3530 SERIES MOTOR SHAFT D4MM WITH CIRCLIP
| L2 (Overall Length) | 51mm |
| L1 (Short End) | 18mm |
| D(Shaft Diameter) | 4mm |
| L3 x L4 (Groove) | 4.5 x 2.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N3536 SERIES MOTOR SHAFT D4MM WITH CIRCLIP
| L2 (Overall Length) | 57.5mm |
| L1 (Short End) | 18.5mm |
| D(Shaft Diameter) | 4mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N3542 SERIES MOTOR SHAFT D4MM WITH CIRCLIP
| L2 (Overall Length) | 63mm |
| L1 (Short End) | 18mm |
| D(Shaft Diameter) | 4mm |
| L3 x L4 (Groove) | 4.5 x 3.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,